A
simulation of an air track glider setup, as it is used for experiments on
constant acceleration motion. A gravitational acceleration of 9.81 m/s2 was
presupposed. The mass of the wagon, the value of the hanging mass and the
coefficient of friction (within certain limits) can be changed. For one
measurement you have to adjust the measuring distance (from the initial
position to the light barrier LB, accuracy 5 mm) with pressed mouse button and
to read the corresponding time (digital display, accuracy 1 ms). During the
movement a red point in the t-s-diagram (time-way-diagram) indicates the
present time and the covered distance. As soon as the measurement of time is
finished, the pair of measured values will be marked on the diagram. After a
mouse click on the "Record data" button the data will be registered on the
list. A series of measurements with the same parameters cannot contain more
than 10 measurements. |